Top hydraulic test units online store right now? The HI/LO segment of this hydraulic pump is built with all-aluminum whereas the endplates are available in cast steel. ToolTuff hydraulic log splitter pump is also available in GPM 11,13, 22 & 28 versions. In terms of hydraulic cylinders or the control valve, Tooltuff is ready to provide it all for any available log splitter in the market. Log splitters, presses, etc are some of the basic HI/Lo applications for this hydraulic pump as these need a speedy movement of the hydraulic cylinder at low-pressure mode before it gets automatically switched to high-pressure mode to meet any load specifications. This one from ToolTuff is a specially purposed one that should really draw your attention if you’re looking for a hydraulic pump for wood splitter or log splitter. The higher GPM, high-quality pump casting, and great machine work are some of the best points of this power unit. It offers great value for the money. So think no further if you’re in search of a great pump for your log splitter.
If you suspect that your system is experiencing transient pressure spikes, hand-held monitoring devices are offered by many OEMs and are an excellent addition to any reliability team’s troubleshooting toolbox. Blocked or restricted pump inlets will typically present in the form of cavitation on the valve plate or what some service technicians refer to as a “marble sound.” Vacuum at the inlet leads to the formation and collapse of small vapor-filled voids. The shockwave generated by the collapse of these voids leads to the surface damage on the valve plate as well as the telltale sound. Ways to monitor for this condition include a limit switch mounted on a suction ball valve feeding the pump (a common system interlock), a pressure transducer installed into the suction line or vibration monitoring through the use of accelerometers mounted to the pump.
There are a few factors you should consider while choosing the right hydraulic pump. First of which is the viscosity. The viscosity refers to the resistance of flow. High viscosity hydraulic pump is not recommended as the liquid should freely flow. Choosing a weak pump can lead to a higher viscosity which will make the pump overwork and reduce its lifespan. Other specifications should be checked regarding its motor, shaft, function valves, oil tank, and other components whether they meet the required benchmark. If there is still any confusion you can feel free to ask us about the hydraulic pumps and its specifications to get yourself clarified whether it meets your needs or not. Discover extra details at hydraulic testers.
Spinning the gears without an uninterrupted oil supply will result in metal-to-metal contact between critical parts in the pump, which are designed to run on a hydrodynamic film of oil. This loss-of-lubrication damage may not be apparent once the pump fills with, and starts displacing, oil but by then the damage is done. So the prudent thing to do is to assume all “self-priming” hydraulic pumps actually are not (especially during initial start-up). If possible, always purge the intake line of air. If appropriate, consider turning the pump by hand (gear-type only) with the outlet vented to ensure it isn’t air bound. And if safe to do so, bleed the outlet on start-up to ensure the pump is displacing oil (and not spinning in an air-lock).
Products stocked include: A wide range of hydraulic pumps under the Parker umbrella including Commercial Pumps and Ultra Pumps; Cast iron David Brown/Hamworthy hydraulic gear pumps; David Brown transmission spares including axles and gearboxes; Oil coolers and air coolers from ASA Hydraulik; A large range of hydraulic pumps and kits for JCBs ;Hydraulic pump testing kits from Webtec; Lifting and pulling winches for a variety of applicationd from TMA; A range of Eaton/Charlynn drillhead motors for drilling rigs; Commercial HD2 hydraulic pumps – no longer manufactured but we have stock and can repair; One of the most popular hydraulic pumps – the Rexroth A10V; The Danfoss PVG32 valve for an efficient hydraulic system; Eaton/Vickers CETOP 3 and CETOP 5 solenoid valves offered at great prices; If you need a hydraulic pump specially made, Unwin can build to your requirements. Find more information on unwinhydraulic.com.