Complete biscuit production line provider by Foodsmachine? Biscuit production line used for automatic making biscuits. Whole line including raw material handling, dough mixing, biscuit forming, biscuit baking, biscuit cooling, biscuit sandwich, and biscuit packing, etc. Available for one kind of biscuit made by using one production line, or a variety biscuit made by using one multifunctional production line. Normally can divide into 2 kinds(according to soft dough biscuit or hard dough biscuit). Specifically divided into 13 kinds(according to finished product). Read more info at https://www.foodsmachine.net/biscuit-production-line.html. Golden Bake was founded by a biscuit line engineer and a biscuit master in 1999. With a vision to be the most completely automatic biscuit production line system supplier in this field, our team has been extending to 280 employees. Now Golden Bake is the top biscuit machinery manufacturer in China.
Adopting with pneumatic conveying system for transport powder in sealed pipe. Due to the weight measurement method, error less than 1kg. No dead angle in pipe without using screw conveyor. Adopting with pump conveying system for transport liquid in sealed pipe. Due to the weight measurement method, error less than 1kg. Avoid the error caused by the difference of material density and temperature in different batch, we don’t using flow measurement.
Automatic system, automatic soluiton, automatic system post baking. When the biscuits coming from the line depending on line capability are centralized by deducting into definite lines, reversed, aligned and fed automatically by aisle to sandwich machine or coating machine. According to customer’s factory shape can optional with turning conveyor device or cantilever conveyor device. Professional conveyor system can effectively reduce labor costs and increase output.
To get good quality dough the hard dough is usually mixed on vertical dough mixer. Two or three paddle machines are used with high mixing speed, 25rpm. The high but gentle mixing action incorporates the ingredients well without undue work input at the sponge stage. The yeast should be dispersed in water before feeding to the mixing tub. The dough is mixed to a temperature of 30~35C, which is the optimum temperature for the action of the yeast. The sponge is fermented for 12hours at a temperature depends on the biscuit master. During this time the pH value will change from about 5.5 to 4.0 and the temperature of the dough will increase. After the fermentation of the dough, the dough tub is taken back to the mixing room. The additional ingredients for the dough are added, including the sodium bicarbonate. Gentle, slow speed mixing is required until homogeneous dough is made. Over-mixing will reduce the spring and give a hard, tough product. After mixing, the dough is returned to the fermentation room for up to 4 hours. With the addition of soda, a large change in the pH occurs and the dough will reach a pH of over 7.0.
General hard dough biscuit with layer texture need use the laminator. Usually laminated with four to six layers at around 4.0mm thickness. The dough is then gauged with a maximum reduction at each gauge roll. Excessive reductions of the dough thickness will prevent good lift or spring of the cracker. A relaxation conveyor is used to relax the tension in the dough sheet before cutting, as soda biscuit are subject to considerable shrinkage after cutting and during baking. Then dough sheet will be cut in any shape as customer want by using a rotary dough cutter. Find additional info at foodsmachine.net.