Top custom alloy wheels supplier? Mistake : the larger the size of the wheel, the better. Many people modify the original intention of the hub is actually simple and rough: good look! The wheel size is larger, the vehicle effect looks bigger, more powerful. To be frank, it’s even higher! But blindly increase the size of the wheel hub,calipers, baffle, suspension system is easy to hit, even lead to heavy damage the vehicle suspension system and increase fuel consumption. General conventional wheel hub modification or upgrade to a maximum of 2 inches is appropriate, but also pay attention to the collocation of tire specifications, tire diameter change <3%. Otherwise it will affect the accuracy of the code table, even may receive a lot of tickets for no reason. See additional details on alloy wheel manufacturers.
Gravity casting wheels:This is the most primitive processing method for aluminum alloy wheels, which can be formed by pouring high-temperature liquid metal into the mold and cooling it. This method is efficient and low cost, but the uniformity of each part of the manufactured wheel is poor, and the molecular density is relatively low, resulting in low strength, so it is not very suitable for high-strength use of passenger vehicles.
One is size: don’t blindly increase the hub. Some people increase the wheel hub to improve the performance of the car. Under the condition that the outer diameter of the tire remains unchanged, the large wheel hub is bound to match the wide and flat tire. The lateral swing of the car is small, and the stability is improved. pass by. However, the flatter the tire, the thinner the thickness, the worse the shock absorption performance, and the greater the sacrifice in terms of comfort. In addition, the tires are easily damaged if there are some roadblocks such as stones. Therefore, the cost of blindly increasing the hub cannot be ignored. Generally speaking, it is most appropriate to increase one or two sizes according to the size of the original wheel hub.
Since pure electric vehicles do not need an engine, the design styles of the front hoods of pure electric vehicles can be diversified, and are generally refined and sharp. The design style of “rocket front” is full of sports, and it is very windy on the road. The functional configuration of pure electric vehicles Its strengths, various types of assisted safe driving, are very popular with novice drivers. Now many first-tier cities are gradually implementing limited numbers and licenses. Many people have money to buy cars, but the number 1 license is hard to get, but the green license is not affected. Electric hybrid models, which are the only choice for car owners in many restricted areas.
One piece forged wheels,Milling and forging,The use of impact or pressure to deform the metal between the upper and lower two against the iron (anvil) to obtain the required block of blanks, blanks after heat treatment and then through the machining center milling and forming, a piece of relatively lighter weight, can achieve the most lightweight dynamic balance better reliability, no hidden gas leakage. The main advantages of steel hubs are simple manufacturing process, relatively low cost and strong resistance to metal fatigue. But the disadvantages are also obvious, such as heavy weight, large inertial resistance, poor heat dissipation and so on.
JWHEEL alloy wheel manufacturers adopt the industry’s advanced casting, spinning, machining, painting and inspection equipment, and at the same time, it is equipped with fully automated robot operation platform and testing equipment to fully meet the product requirements of major high-end customers. The company also sets up a professional team for new product development, design, mold manufacturing, trial production, testing and inspection to provide customers with technical development and support services. Discover extra details on jjjwheel.com.