Automatic control valves supplier 2024: Founded in 2004, SUOTE VALVE is one of the leading valve manufacturer and water treatment solutions provider. With years’manufacturing experience, we now could offer more than 45 series valves and related parts, such as hydraulic control valve, gate valve, butterfly valve, check valve, pressure reducing valve and so on. Most of our certificated products sell to over 36 cities in Europe, North America, South America, Africa, etc. With years’ manufacturing experience, we now could offer more than 45 series valves and related parts. Spare parts will be provided at cost price. With the expansion of the international market, We are inviting more overseas partners to join us.You’re welcome to work with us. See extra information on valve manufacturers.
Solenoid control valve is an on-off control valve that either opens or closes upon receiving an electrical signal to the solenoid pilot control. This valve consists of a main valve and a two-way solenoid valve that alternately applies pressure to or relieves pressure from the diaphragm chamber of the main valve. It is furnished either normally open (de-energized solenoid to open) or normally closed (energized solenoid to open). Liquid level control can be provided by using a float switch or electrode probe which sends an electrical signal to open or close the valve as needed. As one of the best solenoid control valve manufacturers, industrial uses for our automatic solenoid valve are many and include accurate control of process water for batching, mixing, washing, blending or other on-off type uses.
Pressure Testing: Conduct regular pressure tests on the valve to ensure it is functioning correctly and within the required pressure range. This can help identify any issues or potential problems before they become more severe. Calibration: Calibrate the valve periodically to ensure it is operating at the correct set point. Adjust the valve as necessary to maintain the required water level or pressure. Replacement of Components: Replace any worn or damaged components, such as gaskets, seals, or springs. Use only manufacturer-approved replacement parts to ensure compatibility and avoid potential problems. Regular Maintenance Schedule: Develop and follow a regular maintenance schedule for the altitude valve, including routine cleaning, lubrication, inspection, and testing.
NSCV- Non Slam Check Valve is used as protection against reverse flow when power failure in areas where noise pollution or water hammering is a critical issue. It can provide not only quiet performance but also low head loss. Features: High strength ductile iron body used for durability and less weight; Advanced dynamic design of single body with diffuser provides streamline flow and assures lower head loss; One of the lowest head loss check valve, big save in pumping power cost, valve disc with shorter stroker and spring reverse faster than most of check valve; Coated with powder epoxy both inside & outside for corrosion resistance; Bronze bushing reduce wearing problem during operation; Hydrodynamic design with spring ensures non slamming and water hammerless; Stainless steel spring hidden in the diffuser under protection while valve in operation; Disc will positively close before reverse flow, and maximize the closing speed up to 0.2 Sec; Installation can be vertical/horizontal/ inclined. For size DN800 and up preferred vertical installation. ·Comply with EN 558-1, ISO 5752 and EN 1092-2, ISO 7005-2 flange dimension. See extra information at shsuotevalve.com.
Altitude valves are commonly used in elevated water storage tanks, reservoirs, and other structures where maintaining a specific water level or pressure is important. They help ensure a reliable water supply, prevent overflow or underflow, and protect against potential damage or loss. In addition to their use in water distribution systems, altitude valves can also be found in firefighting systems, irrigation systems, and other applications where controlled water levels or pressures are crucial. Overall, altitude valves play a vital role in maintaining water system stability by regulating water levels and pressures, ensuring efficient and effective water management.
The valve is made of DI body and DI disc; Advanced newly design with dovetail seal design and captured by epoxy on the back, with multiple raised ring to have more contact with disc but less friction during closure; The double eccentric design provides less contact area of seal with disc, and less stress at the open position of the disc; The disc design with arch shape and thru disc can provide better flow capacity, stronger and less weight . The shaft and disc connection with tangential pin which can be exchangeable and provide rigid connection; The DN 100-500MM use flat disc, and DN 600-1200MM use arch shape disc; Epoxy coated interior and exterior; Valve design meets or exceeds EN 593; Top flange connection meets ISO 5211-1982, and F/F meets EN 558-1 series 13 & 14.